many new and used engine parts available not shown on this page. Engine cases, cylinders, cyl. heads, valve covers, rocker arms, transmission/gearshift parts,etc.

E-mail with your needs.

 Top End Gasket set for XL350 incl. valve stem seals. Quality set. $75.00

and includes a much better high quality head gasket

Complete Gasket set for XL350 with better std. head gasket,

$85.00

Complete gasket set for the late style (74/75) XL250, $70.00

same set for the early style (72/73) 70.00

Both sets include the valve stem seals
 

NEWS-----I now have new intake and exhaust valves in stock for the 250 & 350. these are extremely good quality custom made steel valves in stock sizes and use stock keepers. 

$45.00 each

CNC machined billet aluminum stator and point cover set

$165.00--------black anodized

$150.00--------plain aluminum

shipping extra

use your imagination with the plain ones, remove the anodize on the fins

for a different look. Lots of ways to go with these.

The HONDA is lazer etched into the metal

Wiseco piston kits

available for most post 78 model XL250/350/500/600.   10.5 to 1 comp. racing style pistons. e-mail for price and availability.

XL250 72 to77

305cc piston kit

cylinder must be bored for the 

new sleeve and then bored for the 

new piston

$405.00 + shipping

 XL250

285cc big bore kit for the XL250, 1972 thru 1977. includes: JE forged piston,rings,pin,clips,head and base gasket. $250.00

Not recommended with the stock carb.

NOW IN STOCK - Shipping $22.00 in the US

 XL250

for the 72 thru 77 XL250

.050 oversize forged piston with aprox 9.5:1 compression

$235.00 + shipping

THIS PRODUCT IS NO LONGER

AVAILABLE

XL250

75.5 mm (.050) oversize) high comp. racing style forged piston kit.  Made in the US.  Aprox. 11:1 compression. $235.00 + shipping. The dome can be milled down some for lower compression and I stock

a thick head gasket

1972 - 1977

XL350

1973-1978

 .020 oversize 9.5:1 comp. piston kit

$235.00 + shipping

 XL350

1973-1978

.020 oversize high comp. piston kit.

$235.00 + shipping

XL350

1973 - 1978

86mm big bore piston kit

takes the motor to 412cc

bore your stock cyl. for a great power increase.

$245.00

includes head and base gasket, shipping extra

Not recommended with stock carb

 XL350R

2nd over stock compression forged piston kit for the 1984/85/86 models with 19mm wrist pin

$250.00 +shipping

I stock the head gasket and base gasket if needed

.

I now have new oil pump rotors in stock, replace them before they break and ruin your motor.

I will rebuild your oil pump if the body is good, replace the rotors, gasket and O rings, lap the body halves. $60.00 + shipping

NOW IN STOCK---Megacycle cams,both billet and needle bearing,. E-mail for current pricing

NOTE: hardweld rocker arms MUST be used with these cams. No warranty if not used. Sold exchange for your old ones. 

I am an authorized Megacycle cam dealer, e-mail for pricing and availability on any motorcycle.

ALSO--- line boring heads for the needle bearing cams. $175.00